describe

Data acquisition system (USB)

Measurement and control.

Accurately record and output signals through usb-ad16f: a high-performance USB data acquisition system is installed in an aluminum shell, which is particularly suitable for dynamic applications with high technical standards and excellent cost performance.

Due to the current isolation of the analog channel, DAQ system and PC are perfectly protected.

16 analog inputs. ±10V，±5V，±2V，±1V。

16 analog inputs can be sampled at 16 bit resolution and 250 kHz total sampling rate, so even slight high frequency signal peaks will not be detected. The measurement range is selected separately for each channel by software.

4 digital inputs / outputs each.

1 counter.

The digital status is recorded or set to four digital inputs and outputs. Synchronous sampling of digital input and analog input. Additional counter inputs are electrically isolated.

Plug and play.

The connection with PC is realized by USB. Usb-ad16f provides all typical USB functions (such as plug and play, hot plug). During the operation, 127 devices can be connected and installed.

Powered by USB.

The device is powered through a USB interface. This reduces cabling effort to a minimum and makes mobile measurement easier.

Lcd20 DIN rail type strain gauge amplifiers are factory calibrated at MV / V, allowing configuration by entering data from the sensor calibration certificate. In all calibration modes, linear calibration up to 10 points can be provided to provide high accuracy over the entire measurement range.

This unit can be easily configured by hand-held programmer or USB connector. With free and intuitive PC toolkit software, you can configure, save and store the file settings